- Homepage
- Key Information
- Students
- Staff
- PGR
- Health and Safety
- Computer Support
- National Student Survey (NSS)
- Intranet Help
Engineering, Mathematics and Physical Sciences Intranet
Dr Mohammad Akrami
Dr Mohammad Akrami
Publications
Copyright Notice: Any articles made available for download are for personal use only. Any other use requires prior permission of the author and the copyright holder.
| 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2015 | 2014 | 2011 |
2024
- Rad HN, Ghasemi A, Akrami M, Golizadeh F. (2024) Evaluating energy, exergy and economic aspects of a CO
2 -free Kalina cycle cogeneration system with various solar collectors, International Journal of Low-Carbon Technologies, volume 19, pages 892-907, DOI:10.1093/ijlct/ctae035. - Rahi MR, Ostadi S, Rahmani A, Dibaj M, Akrami M. (2024) Studying the Improvement of Solar Collector Mechanism with Phase Change Materials, Energies, volume 17, no. 6, pages 1432-1432, DOI:10.3390/en17061432. [PDF]
- Rahmani A, Dibaj M, Akrami M. (2024) Enhancing Heat Storage Cooling Systems via the Implementation of Honeycomb-Inspired Design: Investigating Efficiency and Performance, Energies, volume 17, no. 2, pages 351-351, DOI:10.3390/en17020351. [PDF]
- Ghasemi A, Rad HN, Akrami M, Marefati M. (2024) Exergoeconomic and exergoenvironmental analyzes of a new biomass/solar-driven multigeneration energy system: An effort to maximum utilization of the waste heat of gasification process, Thermal Science and Engineering Progress, volume 48, DOI:10.1016/j.tsep.2024.102407.
- Rahmani A, Dibaj M, Akrami M. (2024) Computational investigation of magnetohydrodynamic flow and melting process of phase change material in a battery pack using the lattice Boltzmann method, Journal of Energy Storage, volume 78, DOI:10.1016/j.est.2023.110046.
2023
- Yan G, Alizadeh A, Rahmani A, Zarringhalam M, Shamsborhan M, Nasajpour-Esfahani N, Akrami M. (2023) Natural convection of rectangular cavity enhanced by obstacle and fin to simulate phase change material melting process using Lattice Boltzmann method, Alexandria Engineering Journal, volume 81, pages 319-336, DOI:10.1016/j.aej.2023.09.035.
- Siahroudi MG, Daryakenari AA, Bahari Y, Koldeh FJ, Mosallanejad B, Keshmarzi MK, Akrami M. (2023) Stirring-assisted solvothermal synthesis of NGr-Co3O4 nanostructures towards oxygen evolution reaction, International Journal of Electrochemical Science, volume 18, no. 10, DOI:10.1016/j.ijoes.2023.100320.
- Ali MA, Elsayed A, Elkabani I, Akrami M, Youssef ME, Hassan GE. (2023) Optimizing Artificial Neural Networks for the Accurate Prediction of Global Solar Radiation: A Performance Comparison with Conventional Methods, Energies, volume 16, no. 17, pages 6165-6165, DOI:10.3390/en16176165. [PDF]
- Mosallanezhad B, Ali Arjomandi M, Hashemi-Amiri O, Gholian-Jouybari F, Dibaj M, Akrami M, Hajiaghaei-Keshteli M. (2023) Metaheuristic optimizers to solve multi-echelon sustainable fresh seafood supply chain network design problem: A case of shrimp products, Alexandria Engineering Journal, volume 68, pages 491-515, DOI:10.1016/j.aej.2023.01.022.
- Carter J, Rahmani A, Dibaj M, Akrami M. (2023) Rainwater Energy Harvesting Using Micro-Turbines in Downpipes, Energies, volume 16, no. 4, pages 1660-1660, DOI:10.3390/en16041660. [PDF]
2022
- Alrowais R, Jatwary A, Abdel daiem MM, Ghazy A, Alwushayh B, Akrami M, Bashir MT, Alanazi F, Alhaz Uddin M, Elkamhawy E. (2022) Numerical Investigation of the Hydraulic Impacts Induced by a Bioreactor Installed in a Contaminated Waterway, Water, volume 15, no. 1, pages 117-117, DOI:10.3390/w15010117. [PDF]
- Moayedi M, Arshi AR, Salehi M, Akrami M, Asl NJ, Naemi R. (2022) An investigation into the hammer toe effects on the lower extremity mechanics and plantar fascia tension: A case for a vicious cycle and progressive damage, Computers in Biology and Medicine, volume 152, DOI:10.1016/j.compbiomed.2022.106381.
- Lloyd R, Akrami M. (2022) A Critical Analysis of Helical and Linear Channel Liquid Cooling Designs for Lithium-Ion Battery Packs, Batteries, volume 8, no. 11, pages 236-236, DOI:10.3390/batteries8110236. [PDF]
- Yousefi M, Abbasi M, Akrami M, Sillanpää M. (2022) Pre-Treatment and Turbidity Reduction of Sea Waters Using New Composite Ceramic Microfiltration Membranes with Iron Oxide Additive, Water, volume 14, no. 21, pages 3475-3475, DOI:10.3390/w14213475. [PDF]
- Flores-Velazquez J, Akrami M, Villagrán E. (2022) The Role of Radiation in the Modelling of Crop Evapotranspiration from Open Field to Indoor Crops, Agronomy, volume 12, no. 11, pages 2593-2593, DOI:10.3390/agronomy12112593. [PDF]
- Mosallanejad B, Javanbakht M, Shariatinia Z, Akrami M. (2022) Improvement of Cycle Stability for Graphite-Based Lithium-Ion Batteries via Usage of Phenyl Methanesulfonate as an Electrolyte Additive, Batteries, volume 8, no. 10, pages 152-152, DOI:10.3390/batteries8100152. [PDF]
- Behrouzeh M, Mehdi Parivazh M, Danesh E, Javad Dianat M, Abbasi M, Osfouri S, Rostami A, Sillanpää M, Dibaj M, Akrami M. (2022) Application of Photo-Fenton, Electro-Fenton, and Photo-Electro-Fenton processes for the treatment of DMSO and DMAC wastewaters, Arabian Journal of Chemistry, volume 15, no. 11, DOI:10.1016/j.arabjc.2022.104229.
- Jardim CGR, Zamani R, Akrami M. (2022) Evaluating the Impact of the COVID-19 Pandemic on Accessing HIV Services in South Africa: A Systematic Review, International Journal of Environmental Research and Public Health, volume 19, no. 19, pages 11899-11899, DOI:10.3390/ijerph191911899. [PDF]
- Xenofontos P, Zamani R, Akrami M. (2022) The application of 3D printing in preoperative planning for transcatheter aortic valve replacement: a systematic review, Biomed Eng Online, volume 21, no. 1, DOI:10.1186/s12938-022-01029-z. [PDF]
- Ghanbarizadeh P, Parivazh MM, Abbasi M, Osfouri S, Dianat MJ, Rostami A, Dibaj M, Akrami M. (2022) Performance Enhancement of Specific Adsorbents for Hardness Reduction of Drinking Water and Groundwater, Water, volume 14, no. 17, pages 2749-2749, DOI:10.3390/w14172749. [PDF]
- Moayedi M, Naemi R, Arshi AR, Akrami M, Salehi M. (2022) Investigation of the ankle contact forces in a foot with hammer toe: A comparison of patient-specific results from finite element modeling and musculoskeletal simulation, 44th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), Glasgow, United Kingdom, 11th - 15th Jul 2022, DOI:10.1109/EMBC48229.2022.9871049.
- Mosallanejad B, Javanbakht M, Shariatinia Z, Akrami M. (2022) Phenyl Vinylsulfonate, a Novel Electrolyte Additive to Improve Electrochemical Performance of Lithium-Ion Batteries, Energies, volume 15, no. 17, pages 6205-6205, DOI:10.3390/en15176205. [PDF]
- Parivazh MM, Mousavi M, Naderi M, Rostami A, Dibaj M, Akrami M. (2022) The Feasibility Study, Exergy, and Exergoeconomic Analyses of a Novel Flare Gas Recovery System, Sustainability, volume 14, no. 15, pages 9612-9612, DOI:10.3390/su14159612. [PDF]
- Arjomandi MA, Shishehsaz M, Ghanbarzadeh A, Mosallanezhad B, Akrami M. (2022) Application of Particle Swarm Optimization for Improvement of Peel Strength in a Laminated Double-Lap Composite Joint, Applied Sciences, volume 12, no. 14, pages 6997-6997, DOI:10.3390/app12146997. [PDF]
- Moayedi M, Arshi AR, Salehi M, Akrami M, Asl NJ, Naemi R. (2022) An investigation into the hammer toe effects on the lower extremity mechanics and plantar fascia tension: A case for a vicious cycle and progressive damage, DOI:10.21203/rs.3.rs-1758484/v1.
- Zhang J, Cao Z, Huang S, Huang X, Liang K, Yang Y, Zhang H, Tian M, Akrami M, Wen C. (2022) Improving the melting performance of phase change materials using novel fins and nanoparticles in tubular energy storage systems, Applied Energy, volume 322, pages 119416-119416, article no. 119416, DOI:10.1016/j.apenergy.2022.119416. [PDF]
- Villagrán E, Flores-Velazquez J, Akrami M, Bojacá C. (2022) Microclimatic Evaluation of Five Types of Colombian Greenhouses Using Geostatistical Techniques, Sensors, volume 22, no. 10, pages 3925-3925, DOI:10.3390/s22103925. [PDF]
- Parivazh MM, Rahmani M, Akrami M. (2022) Numerical Investigation on a Liquid–Gas Ejector for Carbon Dioxide Removal Using Amine Solution: Hydrodynamics and Mass Transfer Evaluation, Applied Sciences, DOI:10.3390/app12094485.
- Khosravifardshirazi A, Johari A, Javadi A, Khanjanpour MH, Khosravifardshirazi B, Akrami M. (2022) Role of Subgrade Reaction Modulus in Soil–Foundation–Structure Interaction in Concrete Buildings, Buildings, DOI:10.3390/buildings12050540.
- Hood C, Zamani R, Akrami M. (2022) Impact of heterotopic ossifcation following lumbar total disk replacement: a systematic review, BMC Musculoskeletal Disorders, DOI:10.1186/s12891-022-05322-9.
- Sahafnejad-Mohammadi I, Karamimoghadam M, Zolfagharian A, Akrami M, Bodaghi M. (2022) 4D Printing Technology in Medical Engineering: a narrative Review, Journal of the Brazilian Society of Mechanical Sciences and Engineering, DOI:10.1007/s40430-022-03514-x.
- Hassan HS, EL-Hefny M, Ghoneim IM, Abd El-Lahot MSR, Akrami M, Al-Huqail AA, Ali HM, Abd-Elkader DY. (2022) Assessment of Using Aloe vera Gel Alone and in Combination with Lemongrass Essential Oil as Coating Materials for Strawberry Fruits: HPLC and EDX analyses, Coatings, DOI:10.3390/coatings12040489.
- Chaplin G, Dibaj M, Akrami M. (2022) Decarbonising Universities: Case Study of the University of Exeter’s Green Strategy Plans Based on Analysing Its Energy Demand in 2012–2020, Sustainability, DOI:10.3390/su14074085.
- Truscott A, Zamani R, Akrami M. (2022) Comparing the use of conventional and three-dimensional printing (3DP) in mandibular reconstruction, BioMedical Engineering OnLine, DOI:10.1186/s12938-022-00989-6.
- Setayeshmanesh T, Parivazh MM, Abbasi M, Osfouri S, Dianat MJ, Akrami M. (2022) Reducing the Environmental Impacts of Desalination Reject Brine Using Modified Solvay Process Based on Calcium Oxide, Sustainability, DOI:10.3390/su14042298.
- Wen C, Li B, Ding H, Akrami M, Zhang H, Yang Y. (2022) Thermodynamics analysis of CO2 condensation in supersonic flows for the potential of clean offshore natural gas processing, Applied Energy, volume 310, pages 118523-118523, article no. 118523, DOI:10.1016/j.apenergy.2022.118523. [PDF]
- Ruhani B, Movahedi P, Saadi S, Ghasemi A, Kheradmand A, Dibaj M, Akrami M. (2022) Comprehensive Techno-Economic Analysis of a Multi-Feedstock Biorefinery Plant in Oil-Rich Country: A Case Study of Iran, Sustainability, DOI:10.3390/su14021017.
- Abdelsalam NR, Abdel-Megeed A, Ghareeb RY, Ali HM, Salem MZM, Akrami M, Al-Hayalif MFA, Desoky E-SM. (2022) Genotoxicity assessment of amino zinc nanoparticles in wheat (Triticum aestivum L.) as cytogenetical perspective, Saudi Journal of Biological Sciences, volume 29, no. 4, pages 2306-2313, DOI:10.1016/j.sjbs.2021.11.059. [PDF]
2021
- Geweely NS, Afifi HAM, AbdelRahim SA, Kamh GMI, Soliman MM, AbdelSattar M, Ali HM, Akrami M, Salem MZM. (2021) Bioactivities of six plant essential oils against some isolated microbes from an archaeological limestone statue at the Saqqara excavation, BioResources, volume 17, no. 1, pages 543-573, DOI:10.15376/biores.17.1.543-573.
- Mansour MMA, Zidan YE, Abou El Fettouh A Abd El Hakim, Allam MMA, Ali HM, Akrami M, Salem MZM. (2021) Characterization of Two Historical Postage Stamps Made from Cotton Fibers and Their Restoration Trials Based on the Experimental Studies, Journal of Chemistry, DOI:10.1155/2021/4162311.
- Rasouli Y, Parivazh MM, Abbasi M, Akrami M. (2021) The Effect of Ceramic Membranes’ Structure on the Oil and Ions Removal in Pre-Treatment of the Desalter Unit Wastewater, Membranes, DOI:10.3390/membranes12010059.
- Ghanbarzadeh A, Azadian E, Majlesi M, Jafarnezhadgero J, Akrami M. (2021) Effects of Task Demands on Postural Control in Children of Different Ages: A Cross-Sectional Study, Applied Sciences, DOI:10.3390/app12010113.
- Tawfeek ME, Ali HM, Akrami M, Salem MZM. (2021) Potential insecticidal activity of four essential oils against the rice weevil, Sitophilus oryzae (L.) (Coleoptera: Curculionidae), BioResources, volume 16, no. 4, pages 7767-7783, DOI:10.15376/biores.16.4.7767-7783.
- Villagrán E, Flores-Velazquez J, Akrami M, Bojacá C. (2021) Influence of the Height in a Colombian Multi-Tunnel Greenhouse on Natural Ventilation and Thermal Behavior: Modeling Approach, Sustainability, DOI:10.3390/su132413631.
- Salem MZM, Ali HM, Akrami M. (2021) Author Correction: Moringa oleifera seeds-removed ripened pods as alternative for papersheet production: antimicrobial activity and their phytoconstituents profile using HPLC (Scientific Reports, (2021), 11, 1, (19027), 10.1038/s41598-021-98415-9), Scientific Reports, volume 11, no. 1, DOI:10.1038/s41598-021-01035-6.
- Jafarnezhadgero A, Fatollahi A, Sheykholeslami A, Dionisio VC, Akrami M. (2021) Long term training on sand changes lower limb muscle activities during running in runners with over-pronated feet, BioMedical Engineering OnLine, DOI:10.1186/s12938-021-00955-8.
- Moustafa MAM, Awad M, Amer A, Hassan NN, Ibrahim E-DS, Ali HM, Akrami M, Salem MZM. (2021) Correction: Moustafa et al. Insecticidal Activity of Lemongrass Essential Oil as an Eco-Friendly Agent against the Black Cutworm Agrotis ipsilon (Lepidoptera: Noctuidae). Insects 2021, 12, 737, Insects, volume 12, no. 11, pages 991-991, DOI:10.3390/insects12110991. [PDF]
- Sheng K, Dibaj M, Akrami M. (2021) Analysing the cost-effectiveness of charging stations for electric vehicles in the UK's rural areas, World Electric Vehicle Journal, DOI:10.3390/wevj12040232.
- Hassan HS, Mohamed AA, Feleafel MN, Salem MZM, Ali HM, Akrami M, Abd-Elkader DY. (2021) Natural Plant Extracts and Microbial Antagonists to Control Fungal Pathogens and Improve the Productivity of Zucchini (Cucurbita pepo L.) In Vitro and in Greenhouse, Horticulturae, DOI:10.3390/horticulturae7110470.
- Karia A, Zamani R, Akrami M. (2021) Socio-Economic Disparities in Access to Diagnostic Neuroimaging Services in the United Kingdom: A Systematic Review, International Journal of Environmental Research and Public Health, DOI:10.3390/ijerph182010633.
- Salem MZM, Ali HM, Akrami M. (2021) Moringa oleifera seeds‑removed ripened pods as alternative for papersheet production: antimicrobial activity and their phytoconstituents profile using HPLC, Scientific Reports, DOI:10.1038/s41598-021-98415-9.
- Ryan-Ndegwa S, Zamani R, Akrami M. (2021) Assessing demographic access to hip replacement surgery in the United Kingdom: a systematic review, International Journal for Equity in Health, DOI:10.1186/s12939-021-01561-9.
- Jafarnezhadgero A, Dehghani M, Abdollahpourdarvishani M, Sheikhalizadeh H, Akrami M. (2021) Effect of textured foot orthoses on walking plantar pressure variables in children with autism spectrum disorders, Journal of Biomechanics, DOI:10.1016/j.jbiomech.2021.110775.
- Elsharkawy GA, Ibrahim HAH, Salah AH, Akrami M, Ali HM, Abd-Elkader DY. (2021) Early and Total Yield Enhancement of the Globe Artichoke Using an Ecofriendly Seaweed Extract-Based Biostimulant and PK Fertilizer, Agronomy, DOI:10.3390/agronomy11091819.
- Newbold C, Akrami M, Dibaj M. (2021) Scenarios, Financial Viability and Pathways of Localized Hybrid Energy Generation Systems around the United Kingdom, Energies, DOI:10.3390/en14185602.
- Fath H, Salah A, Akrami M, Javadi A, Negm A. (2021) Novel standalone solar driven agriculture greenhouse desalination system: self sufficient of energy and irrigating water, AQUA≈360: Water for All - Emerging Issues and Innovations, Exeter, United Kingdom, 31st Aug - 2nd Sep 2021.
- Moustafa MAM, Awad M, Amer A, Hassan NN, Ibrahim E-DS, Ali HM, Akrami M, Salem MZM. (2021) Insecticidal Activity of Lemongrass Essential Oil as an Eco-Friendly Agent against the Black Cutworm Agrotis ipsilon (Lepidoptera: Noctuidae), Insects, volume 12, no. 8, article no. 737, DOI:10.3390/insects12080737.
- Villagrán E, Flores-Velazquez J, Bojacá C, Akrami M. (2021) Evaluation of the Microclimate in a Traditional Colombian Greenhouse Used for Cut Flower Production, Agronomy, DOI:10.3390/agronomy11071330.
- Dibaj M, Javadi A, Akrami M, Ke K-Y, Farmani R, Tan Y-C, Chen A. (2021) Coupled three-dimensional modelling of groundwater-surface water interactions for management of seawater intrusion in Pingtung Plain, Taiwan, Journal of Hydrology Regional Studies, DOI:10.1016/j.ejrh.2021.100850.
- Moayedi M, Arshi AR, Salehi M, Akrami M, Naemi R. (2021) Associations between changes in load-bearing pattern, deformity, and internal stresses at the foot with hammer toe during walking; a finite element approach, Computers in Biology and Medicine, DOI:10.1016/j.compbiomed.2021.104598.
- Chisholm JM, Zamani R, Negm AM, Said N, Abdel daiem MM, Dibaj M, Akrami M. (2021) Sustainable waste management of medical waste in African developing countries: A narrative review, Waste Management and Research, DOI:10.1177/0734242X211029175.
- Abd-Elkader DY, Salem MZM, Komeil DA, Al-Huqail AA, Ali HM, Salah AH, Akrami M, Hassan HS. (2021) Post-harvest Enhancing and Botrytis cinerea control of Strawberry Fruits using low cost and eco-friendly natural oils, Agronomy, DOI:10.3390/agronomy11061246.
- Jacomet A, Khosravifardshirazi A, Sahafnejad-Mohammadi I, Dibaj M, Javadi A, Akrami M. (2021) Analysing the Influential Parameters on the Monopile Foundation of an Offshore Wind Turbine, Computation, DOI:10.3390/computation9060071.
- Osborne JI, Zamani R, Craig K, Akrami M. (2021) Investigating osteoarthritis in the human hip using three-dimensional finite element models, XXVIII Congress of the International Society of Biomechanics, Stockholm, Sweden, 25th - 29th Jul 2021.
- Moayedi M, Salehi M, Arshi AR, Akrami M, Naemi R. (2021) A Finite Element Analysis of foot with hammer toe deformity during walking, XXVIII Congress of the International Society of Biomechanics, Stockholm, Sweden, 25th - 29th Jul 2021.
- Stevens JR, Zamani A, Osborne JIA, Zamani R, Akrami M. (2021) Critical evaluation of stents in coronary angioplasty: a systematic review, BioMedical Engineering OnLine, DOI:10.1186/s12938-021-00883-7. [PDF]
- Villagran E, Bojacá C, Akrami M. (2021) Contribution to the Sustainability of Agricultural Production in Greenhouses Built on Slope Soils: A Numerical Study of the Microclimatic Behavior of a Typical Colombian Structure, Sustainability, DOI:10.3390/su13094748.
- Khanjanpour MH, Rahnama M, Javadi AA, Akrami M, Tavakolpour-Saleh AR, Iranmanesh M. (2021) An experimental study of a gamma-type MTD stirling engine, Case Studies in Thermal Engineering, volume 24, DOI:10.1016/j.csite.2021.100871.
- Akrami M, Mutlum CD, Javadi A, Salah AH, Fath HES, Dibaj M, Farmani R, Mohammed RH, Negm A. (2021) Analysis of Inlet Configurations on the Microclimate Conditions of a Novel Standalone Agricultural Greenhouse for Egypt Using Computational Fluid Dynamics, Sustainability, DOI:10.3390/su13031446.
2020
- Zheng M, Qian Z, Zou Z, Peach C, Akrami M, Ren L. (2020) Subject-specific Finite Element Modelling of the Human Shoulder Complex Part 1: Model Construction and Quasi-static Abduction Simulation, Journal of Bionic Engineering, DOI:10.1007/s42235-020-0098-0.
- Akrami M, Alsari H, Javadi A, Dibaj MAHDIEH, Farmani R, Fath HES, Salah AH, Negm A. (2020) Analysing the material suitability and concentration ratio of a solar-powered parabolic trough collector (PTC) using Computational Fluid Dynamics, Energies, DOI:10.3390/en13205479.
- Tulloch J, Akrami M, Zamani R. (2020) Machine learning in the prevention, diagnosis and management of diabetic foot ulcers: A systematic review, IEEE Access, DOI:10.1109/ACCESS.2020.3035327.
- Salah AH, Fath HES, Negm A, Akrami M, Javadi A. (2020) Simulation of agriculture greenhouse integrated with on-roof Photo-Voltaic panels: case study for a winter day, International Conference on Innovative Applied Energy (IAPE’20), Cambridge, United Kingdom, 15th - 16th Sep 2020.
- Awaad HA, Mansour E, Akrami M, Fath HES, Javadi A, Negm A. (2020) Availability and Feasibility of Water Desalination as Non-conventional Resource for Agricultural Irrigation in the MENA Region: A review, Sustainability, DOI:10.3390/su12187592.
- Akrami M, Gilbert SJ, Dibaj M, Javadi A, Farmani R, Salah AH, Fath HES, Negm A. (2020) Decarbonisation Using Hybrid Energy Solution: Case Study of Zagazig, Egypt, Energies, DOI:10.3390/en13184680.
- Ellison MA, Akrami M, Fulford J, Javadi AA, Rice HM. (2020) Three dimensional finite element modelling of metatarsal stresses during running, Journal of Medical Engineering & Technology, volume 44, no. 7, pages 368-377, DOI:10.1080/03091902.2020.1799092. [PDF]
- Akrami M, Salah AH, Dibaj M, Porcheron M, Javadi A, Farmani R, Fath HES, Negm A. (2020) A Zero-Liquid Discharge Model for a Transient Solar-Powered Desalination System for Greenhouse, Water (Switzerland), DOI:10.3390/w12051440.
- Dibaj M, Javadi A, Akrami M, Ke K-Y, Farmani R, Tan Y-C, Chen A. (2020) Modelling seawater intrusion in the Pingtung coastal aquifer in Taiwan, under the influence of sea-level rise and changing abstraction regime, Hydrogeology Journal, DOI:10.1007/s10040-020-02172-4.
- Thienkarochanakul K, Javadi A, Akrami M, Charnley JR, Benattayallah A. (2020) Stress distribution of the tibiofemoral joint in a healthy versus osteoarthritis knee model using image-based three-dimensional finite element analysis, Journal of Medical and Biological Engineering, DOI:10.1007/s40846-020-00523-w.
- Haxby F, Akrami M, Zamani R. (2020) Finding a Balance: A Systematic Review of the Biomechanical Effects of Vestibular Prostheses on Stability in Humans, Journal of Functional Morphology and Kinesiology, DOI:10.3390/jfmk5020023.
- Akrami M, Salah AH, Javadi A, Fath HES, Hassanein MJ, Farmani R, Dibaj M, Negm A. (2020) Towards a sustainable greenhouse: Review of trends and emerging practices in analyzing greenhouse ventilation requirements to sustain maximum agricultural yield, Sustainability, DOI:10.3390/su12072794.
- O’ Leary D, Zamani R, Benattayallah A, Young P, Javadi A, Akrami M. (2020) Finite element analysis and comparison of human skulls using MRI driven 3D printing, 3D Printing, Advanced Robotics and Automation (3DPARA), London, United Kingdom, 21st - 22nd May 2020.
- Howells M, Zamani R, Benattayallah A, Young P, Javadi A, Akrami M. (2020) The role of MRI and 3D modelling of the mandible in assisting personalised reconstructive surgery, 3D Printing, Advanced Robotics and Automation (3DPARA), London, United Kingdom, 21st - 22nd May 2020.
- Bryars JH, Zamani R, Young P, Javadi A, Benattayallah A, Akrami M. (2020) A comparative analysis of a scoliosis case against a control using 3D printing and MRI based computational modelling, 3D Printing, Advanced Robotics and Automation (3DPARA), London, United Kingdom, 21st - 22nd May 2020.
- Hoadley S, Zamani R, Benattayallah A, Rice H, Young P, Javadi A, Akrami M. (2020) Toward Three-dimensional pre-surgical printed models to assess anatomical and biomechanical differences between healthy and flat feet, 3D Printing, Advanced Robotics and Automation (3DPARA), London, United Kingdom, 21st - 22nd May 2020.
- Saeed A, Edwards S, Totton E, Zamani R, Young P, Javadi A, Dibaj M, Benattayallah A, Akrami M. (2020) Patient-Specific three-dimensional printing models for planning the human shoulder orthopaedic surgeries, 3D Printing, Advanced Robotics and Automation (3DPARA), London, United Kingdom, 21st - 22nd May 2020.
- Akrami M, Javadi A, Farmani R, Negm A, Dibaj M, Fath HES. (2020) Using sustainable energy technologies for desalination in the Middle East and North African (MENA) countries, Advances in Sustainable Energy and Fuels, New York, Usa, 23rd - 24th Apr 2020.
- Akrami M, Javadi A, Hassanein M, Farmani R, Dibaj M, Tabor G, Negm A. (2020) Study of the Effects of Vent Configuration on Mono-Span Greenhouse Ventilation Using Computational Fluid Dynamics, Sustainability, DOI:10.3390/su12030986.
- Zafar AQ, Zamani R, Akrami M. (2020) The effectiveness of foot orthoses in the treatment of medial knee osteoarthritis: A systematic review, Gait Posture, volume 76, pages 238-251, DOI:10.1016/j.gaitpost.2019.12.016. [PDF]
2019
- Conder R, Zamani R, Akrami M. (2019) The biomechanics of pregnancy: A systematic review, Journal of Functional Morphology and Kinesiology, volume 4, no. 4, DOI:10.3390/jfmk4040072.
- Panahi R, Khanjanpour MH, Javadi AA, Akrami M, Rahnama M, Ameri M. (2019) Analysis of the thermal efficiency of a compound parabolic Integrated Collector Storage solar water heater in Kerman, Iran, Sustainable Energy Technologies and Assessments, volume 36, DOI:10.1016/j.seta.2019.100564.
- Dibaj M, Javadi A, Akrami M, Ke K-Y, Farmani R, Chen A, Tan Y-C. (2019) 3D groundwater model analyzing Seawater intrusion in Pingtung Plain coastal aquifer, 16th Groundwater Modellers’ Forum, Birmingham, UK, Birmingham, United Kingdom.
- Yates M, Akrami M, Javadi A. (2019) Analysing the performance of liquid cooling designs in cylindrical lithiumion batteries, Journal of Energy Storage, DOI:10.1016/j.est.2019.100913.
- Ellison M, Javadi AA, Akrami M, Rice H. (2019) Using a Finite Element Model to Investigate Second Metatarsal Stress During Running, International and American society of biomechanics (ISB/ASB 2019), Calgary, Canada, 31st Jul - 4th Aug 2019.
- Dibaj M, Chen AS, Javadi A, Akrami M, Farmani R, Tan Y-C, Lin Y, Ke K-Y. (2019) Integrated model for flood forecasting and river inundation in Taiwan, 17th International Computing & Control for the Water Industry Conference, Exeter, United Kingdom, 1st - 4th Sep 2019.
- Salah AH, Fath HES, Negm A, Akrami M, Javadi A. (2019) Modelling of a novel Stand-Alone, Solar Driven Agriculture Greenhouse Integrated With Photo Voltaic /Thermal (PV/T) Panels, 17th International Computing & Control for the Water Industry Conference, Exeter, United Kingdom, 1st - 4th Sep 2019.
- Porcheron M, Akrami M, Javadi A, Farmani R, Negm A, Fath HES. (2019) A stand-alone Zero-Liquid-Discharge greenhouse model with rainwater harvesting capability, 17th International Computing & Control for the Water Industry Conference, Exeter, United Kingdom, 1st - 4th Sep 2019.
- Khanjanpour MH, Javadi A, Akrami M. (2019) CFD analyses of a tidal hydro-turbine (THT) for utilising in sea water desalination, ISER International Conference on Science, Technology, Engineering and Management (ICSTEM -2019), London, United Kingdom, 7th - 8th Jul 2019.
- Khanjanpour MH, Panahi R, Javadi A, Akrami M, Rahnama M, Ameri M. (2019) Investigating of the thermal performance of utilised materials for an Integrated Collector Storage Solar Water Heater, ISER International Conference on Science, Technology, Engineering and Management (ICSTEM -2019), London, United Kingdom, 7th - 8th Jul 2019.
- Alotaibi DM, Akrami M, DIBAJ M, Javadi A. (2019) Smart energy solution for an optimised sustainable hospital in the green city of NEOM, Sustainable Energy Technologies and Assessments, volume 35, pages 32-40, DOI:10.1016/j.seta.2019.05.017.
- Zamani R, Totton E, Edwards S, Glyde H, Benattayallah A, Akrami M. (2019) 3D printing and its impact on anatomy teaching A case study of manufacturing human shoulder, EduExe2019, Exeter, United Kingdom, 3rd - 3rd May 2019.
- Ellison M, Rice H, Akrami M, Javadi AA. (2019) Developing a Finite Element Model to Investigate Second Metatarsal Stress During Running, UK Association for Computational Mechanics Conference 2019, London, United Kingdom, 10th - 12th Apr 2019, http://ukacm.org/wp-content/uploads/proceedings/2019_Proceedings_UKACM.pdf.
- Akrami M, Javadi A, Hassanein M, Farmani R, Tabor G, Negm A, Fath HES. (2019) Analysing greenhouse ventilation using Computational Fluid Dynamics (CFD), UK Association for Computational Mechanics Conference 2019, London, United Kingdom, 10th - 12th Apr 2019, http://ukacm.org/wp-content/uploads/proceedings/2019_Proceedings_UKACM.pdf.
- Khanjanpour MH, Rahnama M, Javadi A, Akrami M, Tavakolpour M, Iranmanesh M. (2019) An investigation of a Ɣ-type MTD Stirling engine prototype, UK Association for Computational Mechanics Conference 2019, London, United Kingdom, 10th - 12th Apr 2019.
- Chan LC, Akrami M, Javadi A, Tabor GR, Dibaj M, Khanjanpour MH. (2019) Optimisation of a conceptual aircraft model using a genetic algorithm and 3D Computational Fluid Dynamics (CFD), UK Association for Computational Mechanics Conference 2019, London, United Kingdom, 10th - 12th Apr 2019, http://ukacm.org/wp-content/uploads/proceedings/2019_Proceedings_UKACM.pdf.
- Salah AH, Fath HES, Negm A, Akrami M, Javadi AA. (2019) Modeling of a stand-alone, solar driven agriculture greenhouse integrated with Photo Voltaic /Thermal (PV/T) panels, Innovative Applied Energy (IAPE), Oxford, United Kingdom, 14th - 15th Mar 2019.
- Fath HES, Javadi AA, Akrami M, Farmani R, Negm A, Mallick T. (2019) A Novel stand-alone solar-powered agriculture greenhouse-desalination system; increasing sustainability and efficiency of greenhouses, Innovative Applied Energy (IAPE), Oxford, United Kingdom, 14th - 15th Mar 2019.
2018
- Akrami M, Craig K, Dibaj M, Javadi AA, Benattayallah A. (2018) A three-dimensional finite element analysis of the human hip, Journal of Medical Engineering and Technology, volume 42, no. 7, pages 546-552, DOI:10.1080/03091902.2019.1576795.
- Dibaj M, Ke K-Y, Akrami M, Tan Y-C, Javadi A, Farmani R, Chen A. (2018) Towards an integrated model of managing the groundwater and flooding; case study of Taiwan Pingtung Plain, EGU General Assembly 2018, Vienna, Austria, 7th - 12th Apr 2018.
- Alotaibi DM, Javadi A, Akrami M. (2018) A conceptual design of a sustainable hospital in NEOM, 13th World Congress on Healthcare & Technologies, Dublin, Ireland, 14th - 15th Jun 2018, DOI:10.4172/2375-4273-C2-041.
- Charnley J, Craig K, Akrami M, Javadi A, Benattayallah A. (2018) Towards investigating the implications of joint incongruity on the elbow joint using a 3D image-based finite element modelling, 8th World Congress of Biomechanics, Dublin, Ireland, 8th - 12th Jul 2018.
- Craig K, Akrami M, Javadi A, Benattayallah A, Doyle C, Timperley AJ. (2018) Investigating Human Hip Dislocation Using a Three-Dimensional Finite Element Human Hip Model, 8th World Congress of Biomechanics, Dublin, Ireland, 8th - 12th Jul 2018.
- Flecther-Bott KZ, Akrami M, Javadi A, Benattayallah A, Dibaj M, Wall T. (2018) A Subject-specific Three-dimensional Model of the Human Hand and Wrist, 8th World Congress of Biomechanics, Dublin, Ireland, 8th - 12th Jul 2018.
- Thienkarochanakul K, Javadi A, Akrami M, Benattayallah A. (2018) Towards a three-dimensional Finite Element model of the Knee Osteoarthritis, 8th World Congress of Biomechanics, Dublin, Ireland, 8th - 12th Jul 2018.
- Akrami M, Qian Z, Zou Z, Howard D, Nester CJ, Ren L. (2018) Subject-specific finite element modelling of the human foot complex during walking: sensitivity analysis of material properties, boundary and loading conditions, Biomechanics and Modeling in Mechanobiology, volume 17, no. 2, pages 559-576, DOI:10.1007/s10237-017-0978-3.
- Bandmann CEM, Akrami M, Javadi AA. (2018) An investigation into the thermal comfort of a conceptual helmet model using finite element analysis and 3D computational fluid dynamics, International Journal of Industrial Ergonomics, volume 68, pages 125-136, DOI:10.1016/j.ergon.2018.07.004.
2017
- Zheng M, Zou Z, Akrami M, Hu D, Peach C, Ren L. (2017) Large-Scale Subject-Specific Finite Element Modelling of the Human Shoulder Complex, The 26th Congress of the International Society of Biomechanics, Brisbane, Australia, 23rd - 27th Jul 2017.
2015
- Akrami M, Howard D, Nester C, Ren L. (2015) Process of designing a Large-Scale Subject-Specific Finite Element model of the human foot complex, 25th congress of International society of biomechanics, Glasgow, United Kingdom, 12th - 16th Jul 2015.
2014
- Akrami M, Howard D, Nester C, Ren L. (2014) Towards A Large-Scale Subject-Specific Finite Element model of the human foot complex, 7th World Congress of Biomechanics, Boston, Massachusetts, Usa, 6th - 11th Jul 2014.
- Akrami M, Ren L. (2014) A Large-Scale Subject-Specific Finite Element model of the human foot complex, Annual Postgraduate conference of the School of Mechanical, Aerospace and Civil Engineering, University of Manchester, Manchester, United Kingdom, 7th - 8th Apr 2014.
2011
- Akrami M, Utyuzhnikov S. (2011) Multidisciplinary Design Optimization of a Space Shuttle External Tank, MSc dissertation, Submitted to the University of Manchester.
Showing 121 publications from Symplectic.